THOS PUMP WITH NON-RETRIEVABLE PLUNGER
- Pump is designed for operation of wells with small-size casing from 4 inches (102 mm) with wall thickness up to 0.33 inch (8.6 mm).
THOS pump with non-retrievable plunger provides significant increase of flow rate in slim holes.
APPLICATION
Pump is designed for operation of wells with small-size casing from 4 inches (102 mm) with wall thickness up to 0.33 inch (8.6 mm).
ADVANTAGES
- Plunger OD is larger than tubing ID;
- Design prevents damage and clogging in process of run-in-the-hole;
- Pump is equipped with on/off tool and drain valve.
BENEFITS
- Increased flow rate with tubing string of same diameter;
- Reduced drilling cost.
ORDER REFERENCE
20-225-THOS-18-4-0-0-ST-fit2
Specifications
Pump type | tubing |
Nominal size | 57 (225), 63 (250), 70 (275), 83 (325), 95 (375) |
Tubing diameter, inch (mm) | from 2 3/8 (60) |
Casing diameter, inch (mm) | from 4 (102) |
Stroke, inch (mm) | up to 235 (6000) |
Pump head, ft (m) | up to 5905 (1800) |
Estimated flow rate, bopd (m3/d) | up to 1885 (300) |
Delivery
Delivery of your order is possible in the following ways:
- Pickup from the factory;
- Delivery to the address by courier service;
- Delivery to other regions by forwarding agent;
Terms of payment
You can submit an application in the following ways:
- By the phone numbers listed on the website or Contacts page;
- Leave a request on the product page, indicating your contact information;
- Send an email with the required position;