SIPPER PUMP
- Pump is designed for operation in low-rate wells from 3.1 bopd (0.5 m3 /d).
Sipper pump provides continuous operation of low-rate wells.
APPLICATION
Pump is designed for operation in low-rate wells from 3.1 bopd (0.5 m3 /d).
ADVANTAGES
- Simple design;
- Enlarged seat & ball valves and larger flow section;
- Housing with mechanical rod seals (no conventional barrel required);
- Nitrided rod functions as plunger.
BENEFITS
- Reduced load on sucker rod string increases setting depth;
- Non-stop operation of low rate wells even at minimum flow;
- Reduced risk of pump clogging;
- Production of highly viscous oil and emulsions.
ORDER REFERENCE
SIPPER-24
24 – rod OD
Specifications
Pump type | tubing |
Nominal size | 24, 32 (125) |
Tubing diameter, inch (mm) | from 2 3/8 (60) |
Stroke, inch (mm) | up to 135 (3500) |
Pump head, ft (m) | up to 6560 (2000) |
Estimated flow rate, bopd (m3/d) | 3.1-150 (0.5-24) |
Delivery
Delivery of your order is possible in the following ways:
- Pickup from the factory;
- Delivery to the address by courier service;
- Delivery to other regions by forwarding agent;
Terms of payment
You can submit an application in the following ways:
- By the phone numbers listed on the website or Contacts page;
- Leave a request on the product page, indicating your contact information;
- Send an email with the required position;