SAND-GAS ANCHOR
- Sand-gas anchor is used to neutralize or substantially reduce negative effects of solids and gas penetrating into operating parts of pumps and surface equipment.
Sand-gas anchor neutralizes negative effects of solids and free gas on pump intake and increases pump MTBF.
Application
Sand-gas anchor is used to neutralize or substantially reduce negative effects of solids and gas penetrating into operating parts of pumps and surface equipment.
Advantages
- High separation coefficient – up to 95%;
- Adjustable sand trap length – 33-330 ft (10-100 m);
- Sealing cup prevents overloading of workover rig during RIH/POOH operations;
Benefits
- Prevents early wear of downhole equipment;
- Reduced risk of failure caused by pump clogging;
- Longer runlife of ESPCP;
- Workover cost reduction;
Order reference
25-PG-ESP -146/8
25 (2 7/8”) – tubing ID
146 (5 3/4”) – casing ID
8 (0.31”) – casing wall thickness
Specifications
| Pump type | ESP, ESPCP |
| Tubing ID, inch (mm) | from 2 3/8 (60) |
| Casing ID, inch (mm) | 5 1/2 (140), 5 3/4 (146), 6 5/8 (168), 7 (178) |
| Flow rate, bopd (m3 /d) | up to 3144 (500) |
Delivery
Delivery of your order is possible in the following ways:
- Pickup from the factory;
- Delivery to the address by courier service;
- Delivery to other regions by forwarding agent;
Terms of payment
You can submit an application in the following ways:
- By the phone numbers listed on the website or Contacts page;
- Leave a request on the product page, indicating your contact information;
- Send an email with the required position;