Wellhead Equipment for production logging from suspention Roller WHPL-roller3
- Sealing the wellhead during the lowering of development control equipment into the well
Wellhead equipment for geophysical surveys on a cable with a hanging roller is designed to seal the wellhead during the lowering of development control equipment into the well.
Composition:
- Base attaches to fountain equipment through a gasket;
- Blowout preventer with manual ram drive;
- Catcher;
- Lubricator;
- Cable seal with hydraulic packing gland pressure;
- Drain hose;
- Measuring roller;
- Hanging roller with shackle and device (elevator) for attachment to the lubricator;
- Hydraulic pump with hose and quick-release connection.
|
Name |
WHPL-roller3 |
|
Maximum pressure at wellhead MPa / Psi |
21 / 3045 |
|
Ambient temperature °C / °F |
-40…+40 / -40…+1040 |
|
Relative humidity % |
98 |
|
Maximum cable pulling force kN |
30 |
|
Maximum roller load kN |
60 |
|
Maximum cable movement speed m/h / ft/h |
10,000 / 1280 |
|
Maximum cable diameter mm / in. |
8 |
|
Circumference of measuring roller mm/ in. |
1500 / 59 |
|
Circumference of upper roller mm / in. |
1000 / 39 |
|
Maximum diameter of passage area of lubricator mm / in. |
62 / 2,4 |
|
Maximum equipment assembly height mm / in. |
5300 / 208 |
|
Maximum equipment assembly weight kg / lb |
237 / 237 |
Delivery of your order is possible in the following ways:
- Pickup from the factory;
- Delivery to the address by courier service;
- Delivery to other regions by forwarding agent;
You can submit an application in the following ways:
- By the phone numbers listed on the website or Contacts page;
- Leave a request on the product page, indicating your contact information;
- Send an email with the required position;