Wellhead Equipment for wireline production logging WH-Cable
- Sealing the wellhead
Wellhead equipment for geophysical surveys on a cable with development control equipment is designed to seal the wellhead.
Composition:
- Base attaches to fountain equipment through a gasket;
- Blowout preventer with manual ram drive;
- Catcher;
- Lubricator;
- Cable seal with hydraulic packing gland pressure;
- Drain hose;
- Measuring roller;
- Upper roller;
- Unloading rod with centering device and centering roller;
- Hydraulic pump with hose and quick-release connection.
|
Name |
WH-Cable |
|
Maximum pressure at wellhead MPa / Psi |
21 / 3045 |
|
Ambient temperature °C / °F |
-40…+40 / -40…+104 |
|
Relative humidity % |
98 |
|
Maximum cable pulling force kN / |
30 |
|
Maximum roller load kN |
60 |
|
Maximum cable movement speed m/h / ft/h |
6000 / 19685 |
|
Maximum cable diameter mm / in. |
12 / 0,47 |
|
Circumference of measuring roller mm / in. |
1500 / 59 |
|
Circumference of upper roller mm / in. |
1000 / 39 |
|
Maximum bore diameter of lubricator mm / in. |
62 / 2,4 |
|
Maximum equipment assembly height mm / in. |
3600 / 142 |
|
Maximum equipment assembly weight kg / lb |
230 / 507 |
Delivery of your order is possible in the following ways:
- Pickup from the factory;
- Delivery to the address by courier service;
- Delivery to other regions by forwarding agent;
You can submit an application in the following ways:
- By the phone numbers listed on the website or Contacts page;
- Leave a request on the product page, indicating your contact information;
- Send an email with the required position;