Sealer of Geophysical Cable Sealer Cable-40×35
- Sealing geophysical cables during geophysical surveys and other operations in active oil and gas wells
- Used as part of wellhead equipment WH-Cable, WH-rod4, WHS-roller2, or similar equipment
The sealer is designed for sealing geophysical cables during geophysical surveys and other operations in active oil and gas wells. The sealing elements are rubber gaskets with hydraulic pressure. Leakage of well fluid is drained through a drainage nozzle. In the lower part of the sealer, which enters the lubricator, a special section is installed for additional cable sealing when working with well fluid containing gas. An emergency valve is installed in the lower part of the section.
Application Area:
Works as part of wellhead equipment WH-Cable, WH-rod4, WHS-roller2, or similar equipment.
|
Name |
Sealer Cable -40x35 |
|
Diameter of body bore mm / in. |
40 / 1,5 |
|
Maximum working pressure MPa / Psi |
35 / 5076 |
|
Diameter of sealed cable mm / in. |
6.3…12.5 / 0,007…0,5 |
|
Ambient temperature °C / °F |
-40…+40 / -40…+104 |
|
Relative humidity % |
98 |
|
Connection thread |
QRC Tr130x6 |
|
Height no more than mm / in. |
1156 / 45,5 |
|
Weight no more than kg / lb |
16 / 35 |
Delivery of your order is possible in the following ways:
- Pickup from the factory;
- Delivery to the address by courier service;
- Delivery to other regions by forwarding agent;
You can submit an application in the following ways:
- By the phone numbers listed on the website or Contacts page;
- Leave a request on the product page, indicating your contact information;
- Send an email with the required position;