Sectional Pipe of lubricator Pipe-2,4×21, Pipe-2,5×35
- Housing the downhole tool with weights and sealing the wellhead
- Used as part of wellhead equipment WH-Cable, WH-rod4, WHS-roller, WHS-roller2, WHPL-roller3, WH-slickline, or similar equipment
The sectional lubricator tube is designed for housing the downhole tool with weights and sealing the wellhead during the lowering of development control equipment into the well.
Application Area:
Works as part of wellhead equipment WH-Cable, WH-rod4, WHS-roller, WHS-roller2, WHPL-roller3, WH-slickline, or similar equipment.
|
Name |
Pipe-2,4x21 |
Pipe-2,5x35 |
|
Outer diameter mm / in. |
73 / 2,8 |
89 / 3,5 |
|
Diameter of passage area mm / in. |
62 / 2,4 |
65 / 2,5 |
|
Maximum working pressure MPa / Psi |
21 / 3045 |
35 / 5076 |
|
Section length m / in. |
10; 13; 15 / 39,4; 51,2; 59,0 |
10; 15; 20; 30 / 39,4; 59,0; 78,7; 118,1 |
|
Working temperature range °C |
-40…+40 / -40…+104 |
-40…+40 / -40…+104 |
|
Relative humidity % |
98 |
98 |
|
Connection dimensions of the body (Top coupling, bottom nipple) |
Tubing 2 7/8” QRC Tr110x6 |
Tubing 3 1/2” QRC Tr130x6 |
|
Weight no more than kg |
45 / 99 |
33-59 / 72-130 |
Delivery of your order is possible in the following ways:
- Pickup from the factory;
- Delivery to the address by courier service;
- Delivery to other regions by forwarding agent;
You can submit an application in the following ways:
- By the phone numbers listed on the website or Contacts page;
- Leave a request on the product page, indicating your contact information;
- Send an email with the required position;