Geophysical Equipment
-
Catcher С62×21, С65×21, С65×35
The catcher is part of the wellhead equipment for oil and gas wells and is used during geophysical surveys and well operations. -
Geophysical Cable Sealer Sealer Cable -40×21
The sealer is designed for sealing geophysical cables during geophysical surveys and other operations in active oil and gas wells. The sealing elements are rubber gaskets with hydraulic pressure. Leakage of well fluid is drained through a drainage nozzle. -
Sealer of Geophysical Cable Sealer Cable-40×35
The sealer is designed for sealing geophysical cables during geophysical surveys and other operations in active oil and gas wells. The sealing elements are rubber gaskets with hydraulic pressure. Leakage of well fluid is drained through a drainage nozzle. In the lower part of the sealer, which enters the lubricator, a special section is installed for additional cable sealing when working with well fluid containing gas. An emergency valve is installed in the lower part of the section. -
Sealer of Geophysical Cable for Swabbing SealerS-40×35
The sealer is designed for sealing geophysical cables during swabbing geophysical surveys and other operations in active oil and gas wells. The sealing elements are rubber gaskets with hydraulic pressure. Leakage of well fluid is drained through a drainage nozzle. -
Sealer of Geophysical Cable with Hand Hold-down SealerH-06
The sealer is designed for sealing geophysical cables during geophysical surveys and other operations in active oil and gas wells. The sealing elements are rubber gaskets with manual pressure. Leakage of well fluid is drained through a drainage nozzle. -
Slick line Sealer with Hand and Hydraulic hold down S-sealer-06, UPG-06
The sealer is designed for sealing wire during geophysical surveys and other operations in active oil and gas wells. The sealing elements are rubber gaskets with manual (S-sealer-06) or hydraulic (UPG-06) pressure. -
Measured Roller RollerM-1,0×30, RollerM-1,5×30
The measuring roller consists of a bracket for mounting the roller with a measured circumference length at the wellhead and a bracket on which the depth sensor is installed. -
Upper Roller RollerU-1,0×30
The upper roller is part of the wellhead equipment for oil and gas wells and is used during geophysical surveys and well operations. -
Hanger Roller RollerH-1,5×60
The hanging roller is part of the wellhead equipment for oil and gas wells and is used during geophysical surveys and well operations. -
Upper Roller RollerU-1,0×30
The upper roller is part of the wellhead equipment for oil and gas wells and is used during geophysical surveys and well operations. -
Borehole fluid tap TapBF-62×21, TapBF-65×21
The drain in the form of a cross or tee is designed for draining fluid during well swabbing. -
Sectional Pipe of lubricator Pipe-2,4×21, Pipe-2,5×35
The sectional lubricator tube is designed for housing the downhole tool with weights and sealing the wellhead during the lowering of development control equipment into the well.